This jig is used for measuring the adhesion strength of coating and the basic material such as under JIS A 9696. As the method, an assisting piece (to be disposed later) is to stuck on the coating film by adhesive, and then the coating in the surrounding is to be cut and measured.
This is a special type the 90° peeling examination. The sample is put on the upper part jig with rollers. The film is pulled down ward in the 90° direction and peeled off. It is used for JIS X 6305-1 'cards peeling examinations'.
This jig has a mechanism to hold the non-peeled part of a test piece horizontal during the test.
This jig is in exclusive use for the seal peeling of the toner containers of such as copiers / printers.
© 2018 Shraddha Impex. All Rights Reserved.
Developed by 
